Behringer Minicom COM800 Manuel d'utilisateur télécharger pdf (Page 14)

MINICOM COM800

5. INSTALLATION

5.1 Connection options and audio connections

There are various ways to integrate the COM800 into your set-up. Depending on the application in

question, you will need different sets of connecting cables.

5.1.1 The MINICOM in the insert path

Connect the MINICOM via the insert paths of a mixing console if you want to compress individual

signals or sub-groups comprising several instruments. Use standard insert cables. These Y cables

have two 1/4" TS connectors at one end, and one 1/4 TRS connector at the other. Connect the plug

marked Send to the INPUT L jack of the COM800. Connect the Return plug to the corresponding

OUTPUT L jack of the device. Connect the TRS connector to the insert jack of the channel strip on

the mixing console.

For sub-group stereo compression use two insert cables and select a suitable preset. The second

cable must be connected to the INPUT/OUTPUT R jacks of the COM800.

Fig. 5.1: Connecting the MINICOM to the insert paths

Fig. 5.2: Insert cable with one 1/4" TRS and two 1/4" TS connectors

5. INSTALLATION

1 2 ... 9 10 11 12 13 14 15 16 17 18 19

Pas de commentaire

Behringer Minicom COM800 Manuel d'utilisateur Page 14