Behringer Eurorack Manuel d'utilisateur télécharger pdf (Page 14)

Phantom power (+48 V DC) is provided. This can be switched on or off by the +48 V Phantom switch .

+ Care should be taken NOT to plug mics into the console (or stagebox) while the phantom

power is on. Also, mute the monitor/PA speakers when turning phantom power on or off.

Allow the system to adjust for a couple of seconds after engaging phantom power before

setting input gains.

If possible, connect the unit to other devices in a balanced configuration to allow for maximum interference

immunity.

Unbalanced use of

mono 1/4" jack plugs

Ring

Balanced use of

stereo 1/4" jack plugs

Balanced use with XLR connectors

1 2

2 1

Input Output

Tip =

Signal

Tip =

hot (+ve)

Sleeve =

Ground / Shield

Sleeve =

Ground / Shield

Tip

Sleeve

Strain relief clamp

Ring =

cold (-ve)

For connection of balanced and

unbalanced plugs, ring and sleeve have

to be bridged at the stereo plug.

1 = Ground / Shield

2 = hot (+ve)

3 = cold (-ve)

For unbalanced use pin 1 and pin 3 have to be bridged

Fig. 6.3: Different plug types

6. CONNECTIONS

1 2 ... 9 10 11 12 13 14 15 16 17 18

Vince 24 May 2025 | 09:25:46

Behringer Eurorack Manuel d'utilisateur Page 14