Behringer SHARK DSP110 Instructions d'exploitation télécharger pdf (Page 6)

SHARK DSP110

1.3 Control elements

Fig. 1.2: Front panel control elements of the DSP110

The CLIP LEVEL METER shows you whether or not the digital circuitry is

driven correctly. Any corrections can be made with the CLIP LEVEL control

. Be sure that the CLIP LED wont light up.

The CLIP LEVEL control lets you adapt the internal gain optimally to the digital

circuitry. If gain is too high (CLIP LED lights up), raise the CLIP LEVEL value by

turning the control to the right (and vice versa). Thus, you can shift the operating

level upwards/downwards.

+ The CLIP LEVEL control does not affect the input/output levels, but adapts

the audio signal as optimally as possible to the threshold of the digital

circuitry.

These five LEDs symbolize the units of the parameters that can be adjusted on

the display .

1. INTRODUCTION

DATA-MANFULL_DSP110_ENG_Rev. E.p65 20.04.01, 15:456

1 2 3 4 5 6 7 8 9 10 11 ... 25 26

Pas de commentaire

Behringer SHARK DSP110 Instructions d'exploitation Page 6