Behringer Xenyx XL2400 Manuel du propriétaire télécharger pdf (Page 7)

7 XENYX XL3200/XL2400/XL1600 User Manual

3. Installation

3.1 Audio connectors

The ¼" inputs and outputs of the BEHRINGER XENYX mixer are unbalanced

mono TS connectors except for the balanced Line inputs on the mono and stereo

channels as well as the Main Out connectors. Of course, you can use the mixer

with balanced as well as unbalanced ¼" connectors. The CD/TAPE inputs and

outputs are stereo RCA connectors.

◊ Make sure that only competent people install your mixer. They must

be sufficiently grounded during and after the installation process.

Otherwise, electrostatic discharges may negatively affect the

operating characteristics of your equipment.

output

For unbalanced use, pin 1 and pin 3

have to be bridged

1 = ground/shield

2 = hot (+ve)

3 = cold (-ve)

input

Balanced use with XLR connectors

Fig. 3.1: XLR connector

strain relief clamp

sleeve

ring

tip

sleeve

ground/shield

For connection of balanced and unbalanced plugs,

ring and sleeve have to be bridged at the stereo plug.

Balanced ¼" TRS connector

ring

cold (-ve)

tip

hot (+ve)

Fig. 3.2: ¼" TRS connector

strain relief clamp

sleeve

tip

sleeve

(ground/shield)

Unbalanced ¼" TS connector

tip

(signal)

Fig. 3.3: ¼" TS connector

strain relief clamp

sleeve

ring

tip

sleeve

ground/shield

Connect the insert send with the input and the

insert return with the output of the eects device.

Insert send return ¼" TRS connector

ring

return (in)

tip

send (out)

Fig. 3.4: Insert send/return stereo plug

strain relief clamp

sleeve

ring

tip

sleeve

ground/shield

¼" TRS headphones connector

ring

right signal

tip

left signal

Fig. 3.5: ¼" headphones connector

shield

sleevesleeve

tip tip

Fig. 3.6: RCA cable

1 2 3 4 5 6 7 8 9 10 11 12 ... 21 22

Commentaires sur ces manuels

Pas de commentaire

Behringer Xenyx XL2400 Manuel du propriétaire Page 7

Commentaires sur ces manuels