Behringer B-Control Deejay BCD3000 Manuel d'utilisateur télécharger pdf (Page 15)

15 B-CONTROL DEEJAY BCD3000 User Manual

Group Name MIDI CC no.

DECK A LOW KILL

MID KILL

HIGH KILL

RELOOP

SYNC

SCRATCH

PLAY

CUE

DECK B LOW KILL

MID KILL

HIGH KILL

RELOOP

SYNC

SCRATCH

PLAY

CUE

INPUT SELECT EXT IN A

EXT IN B

FX CONTROL ON (FX unit active)

FX ▼ (preset down)

FX ▲ (preset up)

ACTION (or TAP)

CUE SELECT CUE A

CUE B

KEY DECK A+B KEY DECK A+B* 25

Table 6.5: MIDI commands for receiving button LED statuses

Data request for all moving elements:

If the “Data Request” command (demand for data) is sent from a suitable

software application to the BCD3000 as “Control Change” command (100)

on MIDI channel 1, the B-CONTROL transmits its current controls settings to the

MIDI or DJ software application. This aﬀects all knobs and faders apart from both

wheels and buttons.

MIDI channel MIDI CC no.

CH. 1 100

Table 6.6: Controller for data request

Selecting the input channel:

You can select the analog input A (see chapter 2.3) via MIDI. To do this,

a program change command must be sent to the BCD3000.

ANALOG INPUT A

selection

MIDI channel MIDI message

PHONO A IN CH. 1 Program Change 0

MIC IN CH. 1 Program Change 1

Table 6.7: Switching the analog input using program change commands

Acceleration behavior of the Wheels:

Both wheels are automatically selected when the acceleration option is switched

on. The quicker you turn one of the wheels, the stronger the value changes.

In TRAKTOR 3 LE, this means the following:

In PLAY mode, you can speed up or slow down the track quicker.•

In PAUSE mode, you can move quicker through the track.•

The value change relates directly to the wheel’s speed when scrolled manually.

When the SCRATCH button is activated, the acceleration is temporarily turned oﬀ

in order to ensure an optimum scratch behavior.

In case you want to deactivate the acceleration when using other MIDI

software applications, apply a MIDI command that is transmitted from the MIDI

application to the BCD3000. After doing so, the value changes will be constant

when scrolling the wheel (left turn: 63, right turn: 65), regardless how quick.

MIDI channel MIDI CC no. Value Behavior

CH. 1 99

0-63 Wheels Acceleration = oﬀ

64 -127

Wheels Acceleration = on

(default)

Table 6.8: Switching between wheels’ accelerations

Audio Connections7.

You will need a large number of cables for diﬀerent applications. The illustrations

below show how the connectors should be wired. Be sure to use only

high-grade cables.

The microphone input of the BCD3000 is electronically balanced to avoid

hum problems.

Of course, you can also connect unbalanced microphones to the balanced input.

In this case, connect pin 1 and pin 3.

output

For unbalanced use, pin 1 and pin 3 have to be bridged

1 = ground/shield

2 = hot (+ve)

3 = cold (-ve)

input

Balanced use with XLR connectors

Fig. 7.1: XLR connector

1 2 ... 10 11 12 13 14 15 16 17 18 19 20

Commentaires sur ces manuels

Pas de commentaire

Behringer B-Control Deejay BCD3000 Manuel d'utilisateur Page 15

Commentaires sur ces manuels

Produits connexes et manuels pour Mélangeurs Behringer B-Control Deejay BCD3000