8 V-TONE GMX1200H/GMX212/GMX210/GMX112/GMX110 User Manual
3. Applications
The V-TONE features many dierent connectors, allowing you to adapt to all
kinds of application challenges. We have listed just a few examples to show the
exibility your V-TONE.
3.1 Practice setup with playback
Aux/Tape In
CD Player
Footswitch
HPS3000
BEHRINGER
V-TONE GMX110
Electric Guitar
Drum Computer
Fig. 3.1: Standard setup
To use your V-TONE in practice rooms, or to jam at home, connect your V-TONE
as illustrated in gure 3.1. Connect a CD player or a drum computer to the
TAPE input. You can control the volume of the connected signal by using the
TAPEINPUT control (on the GMX210, GMX212 and the GMX1200H, the AUX
control adjusts the signal connected to the AUX IN). If you want (or haveto!)
topractice using headphones, connect your headphones to the PHONES
connector on your V-TONE. The loudspeaker is automatically muted. Connectthe
provided dual footswitch to the footswitch connector on the V-TONE. Use the
CHANNELfootswitch to switch between the channels. If is active
(see section 4.1), the eects selected for both channels are loaded. Use the
IN/OUT footswitch to activate/deactivate the eect. Keeping CHANNEL depressed
for about 2 seconds activates the internal tuner.
3.2 Recording setup with an external
eectsdevice
FX In FX Out
Insert Return/
Aux In
Insert Send
DSP2024P
Electric Guitar
Footswitch
BEHRINGER
V-TONE GMX210
Line Out
Multi-track Recorder
HPS3000
Fig. 3.2: Recording setup
If you want to use your V-TONE in home recording or studio situations, wesuggest
wiring your equipment as illustrated in gure 3.2. Of course, youcancontinue
using a CD player or a drum computer. However, for clarity’s sake we’ve omitted
those two in this illustration. Connect the input of your eects unit to the
INSERT SEND connector of the V-TONE; connect the output on your eects unit
totheINSERT RETURN connector on the V-TONE.
If you wish to record the guitar signal together with the stereo eects,
connectthe LINE outputs to your mixer, audio sequencer or a multi-track
recorder. Torecord the dry guitar signal without the internal eects, it is best
to use the INSERT SEND connector on the V-TONE. You can also use both outputs
at the same time to for example record the dry signal without permanently
committing to a single eect. At the same time, the LINE output (with the eect
signal) lets you listen to yourself while recording.
Of course, you can insert a Wah pedal or some other stomp box instead of an
external 19” eects unit. To achieve a parallel stereo insert, you can connect the
eect return to the AUX input, and then use the AUX IN control to determine the
extent to which the eect is present. In this case, the eects unit should be set
up to 100% eect signal, and the INSERT RETURN connector should have nothing
plugged into it.
Commentaires sur ces manuels